Been busy carving up some King Billy Pine but the first two lures were produced from Flash's lure duplicating machine :D
A handy peice of kit that i have been busy replicating .My machine should be going in the next week or so
Here is just a few ...
I got these two 70mm lures as blanks from the duplication machine ,turned out rather snazzy too with a very nice tail dancing action ...
Green Machine !
A 50mm Balsa/Epoxy number that has a very fine tight shimmy ,static too and runs to around 4-5' :D
Another static unit that dives to around 6' with a fast action and is 55mm long .No epoxy coats on this one as yet .
A 50mm shallow runner with a big rock and roll action .Runs around 2-3' .
80mm deep diver in "Tequila Sunrise" .Sinking number with what i call the perfect action .
Rock and tail whip combined ;)
80mm naked King Billy Pine extra deep diver .Still requires its last coat of epoxy and is sanded back ready for re-coating in this pic .
Dives harder than any pro soccer player
The natural stain around the head area also freakishly worked out to be in the exact right place to segment the head from the body
50mm KBP minnow that dives to around 5' .
Good bye blisters when this machine gets going :D